Pages
Wednesday, 17 August 2022
Squares by Dee
Monday, 8 August 2022
Large Match Box by Nicky Roussou
Large Match Box by Nicky Roussou
Hello lovely creative people and welcome to my blog post for the fab Tando-Creative Large Match Box.
I made this box over a few evenings and unfortunately, I forgot to take photos as I went along but I will talk you through what I done to create this.
It all started with some very light weight air dry clay and making a selection of different types of toadstools. I need a home to display them and what better place than one of the large Match Boxes!
For the outside of the box I started by coating with some black gesso.
On the outside of the box I used the Tim Holtz 3D embossing folder to give it a woodgrain effect. I painted the woodgrain with some Decoart Brown paint.
I then used the Stampier Rust Effect Stencil to give it some dimension and selectively painted in some colours to give it a rusty feel. These were a Teal and Orange and then used a metallic bronze to highlight some bits on the raised stencilled areas. This was then all coated with a layer of Decoart quin gold (one of my favourites)
I made some flat back toadstools too which I used for the front of the box. I gave them a bit of sparkle too with the Stampier glass sparkles.
I also added 2 medium size Tando-Creative layered butterflies with some metallic rose gold paint by decoart and a few sparkles too and a delicate bit of chiffon with burnt edges behind to add to the rustic look.
For the inside of the match box, I used the Tim Holts 3D embossing folder to create a brick wall which I then painted it brown and highlighted some brick edges with some metallic gilding wax.
I painted up and used 4 of the toadstools I have made and placed them inside the match box (don't they look cute!)
I added some green moss to the base to give the effect of them growing from the ground and then used a little Cadence green to give the impression the moss was growing.
Lastly, I used the Tim Holtz 3D mini frame, painted brown and highlighted with a wonderful little quote that reads " Today is a good day to try"
Thank you for reading and feel free to ask any questions.
Much Love x
PRODUCTS USED:
Tando-Creative Large Match Box
Tando-Creative Layered Butterflies
Decoart Paint: Teal, Orange,
Burnt Umbra, Quin Gold
Friday, 5 August 2022
24 Boxes of Advent - Dun Drekly by Kim
Part of my inheritance from my mother was a Dremel. It is a multi purpose tool often used by model makers. It has many different bits and spins at very high speeds. (It sounds a bit like a dentist's drill).
So, I thought, let's give it a go on greyboard ...
A short video of the finished box is available at : instagram.com/the_scratchypen/
I put the box together as in previous episodes of '24 Boxes of Advent' then, once dry, got to work with the Dremel. I chose a very small ball shaped bit, and after sketching out the rough stone wall, carved gently into the greyboard to produce the recessed joints between the stones. I was careful not to go too deep. This produced a lovely rustic looking surface.
My original plan was to have just three stones missing from the wall so the viewer could get a glimpse of what was inside, but, I changed my mind and opened up a big window. I sanded the surface lightly to tidy up the edges of the carving.Next, a base coat of DecoArt Zinc, followed by random dry brushed patches of Burnt Umber, Burnt Orange, True Ochre. For the mossy edges, and the outside of the box I used Forest Green and Wasabi Green. I added snow to the edges (well it is supposed to be Christmas!) with a texture paste. I used a little black under each stone as shadow.
Next, the interior - a diorama. I measured the inside of the drawer section. Across the back is 76mm, from front to back (interior measurement) is 69mm. It is 75mm tall. From a cereal box I cut a piece 185mm wide and 75mm high. Measureed 60mm in from both ends for the folds. This meant there was a backdrop of 65mm wide. By making the walls a bit smaller it increases the 3D effect especially in the fireplace. I used a sharp craft knife to cut out my sketched fireplace.
Now the scene. Choose your wallpaper. Pink and green stripes seemed nice (Really?). And a white skirting board (mouse hole is optional).
On the left we have two pictures, a portrait of Auntie Mable, and a scene of rolling hills and sheep on a sunny, summers day. These were painted on small greyboard scraps of 10mm x 15mm.
On the right a Christmas tree. The tall side are 55mm and the bottom of the triangle is 50mm folded in the centre. Decorate your tree with your favourite baubles. The star is in Venetian Gold paint. Other baubles are painted around the room as you see fit.
The end wall. The fire grate is painted with Zinc then the ironwork in Lamp Black. The flames are painted with red, orange and yellow flame-shaped dabs using a small detail brush. The mantle piece is cut from a small piece of balsa wood, and the surround, either side is wooden coffee stirrers. These are painted with a wash of Burnt Umber for a nicer colour. Two small pieces of waste greyboard are painted gold for the wall lights, and a piece of greyboard offcut has cooking foil glued on the surface, and a frame of Lamp Black, for the mirror. Christmas stockings are cut from cereal box and painted. A spot of glue sticks them to the mantle.
The wooden floor is a wash of Burnt Umber painted in stripes, and the fireside rug is more cereal box painted to fit with the rest of the decor.
Once your scene is dry tidy up the creases and slot it in.
Mother's Dremel |
The wooden shutter is built from coffee stirrers and stained with a wash of Burnt Umber. I left the support rails long so that I could add the house name board and use it as a handle to slide open the shutter. I had to make a pair of small cutouts in the box to accommodate the rails.
Products:
Scraps and greyboard offcuts
Specimen Binder- Fiona Randall
Morning Lovely People. Fiona here today to show you a specimen binder I ceated.
Tuesday, 2 August 2022
A Sized Covered Book by Bernadette
Good Morning Friends.
I have created this A sized book using the largest of the pack from Tando. https://www.tando-creative.co.uk/a-sized-book-covers-and-pre-drilled-spines.html
I started off by painting the covers with cream paint and let them dry.
I then added torn pieces of some Tim Holtz collage paper. I used collage medium to stick the collage paper to the covers.
Once the collage paper had dried, I added some crackle paste through a stencil
When the texture paste was dry I sprayed some vintage photo distress spray and added some watered down speckled egg distress paint.
I then fixed the book together using some book binding tape and I used ground espresso archival ink around the edges of the book,
I attached a moulded silicone frame and photo the front cover to finish the book off.
Hope you enjoy whatever you decide to do with your books :)
Bernadette xxx