3D With Dee

Hi Everyone Dee here today with my 3D piece or not

I have a project but it is quite large and 

I just couldn't get it finished

in time for this post.

So here is a sneak Peek below of the project I will do a full post

  once I have completed it.

For this piece I used a media board that I had used the 

A Skinner Stencil/Mask - Incognito with crackle paste 

down the centre of a 

Mixed Media Boards 74mm x 138mm.

Once the media board was dry I painted the whole board with

Prussian blue hue mixed with tinting base.

Next I used Media Antiquing: Raw Umber over the top and 

knocked back.

next I used crackle paint to paint the centre area around the

cogs.

I used Cogs Grab bag that had been coated with texture sand paste

then painted with Raw Umber and highlighted with

treasure gold. The other pieces are a clock 

stamped onto a Tando circle and the other has 

small cogs highlighted in liquid glass.

That's all for today folks be back with the 3D project soon.

Cheers Dee x

PRODUCTS USED

1. Tando products used were Mixed Media Boards 74mm x 138mm, A Skinner Stencil/Mask - Incognito , Cogs Grab bag, Grab bag of Circles.
2. Deco Art media, Media Antiquing: Raw Umber, media texture sand paste and crackle paste, crackle paint, Liquid glass, tinting base & ultra matt medium to seal it all. Deco art media Raw Umber, Prussian Blue hue, Quinacridone gold & Paynes grey.