Black modelling paste by Dee

Hi folks how are you all this week? I have a Tando 

tag to share with you today that i have used 

black modelling paste to create.

 I started with a coat of gesso followed by area's painted 

in the following colours Diarylide Yellow, Blue Green Light, Pyrrole 

Red media paint your tag should be like a patch 

work of these colours. Red media paint 

 Next follow this with weather wood in patches over the tag 

or you can if you want large crackle all over put it 

all over the tag and allow to dry.

 Next a coat of white crackle paint once dry follow with a 

watery wash of Prussian Blue Hue once dry follow with

 another wash of watery Transparent Yellow Iron Oxide.

 Using a palett knife apply black modelling paste to 

the the base of the tag and sides tap the flat of the knife 

on the surface to create little peaks. sprinkle both

Aged Copper Embossing Enamel, Aged Gold Embossing

 Enamel over the paste and heat set.

I Stamped Andy's Skinners skull stamp onto a white

 piece of card which I then cut out and glued onto 

a Tando heart. The area's that were free I put 

black modelling paste and embossing powder 

as well.

To finish off quinacridone gold was used to create the

rust effects on the tag.

I hope you have all enjoyed my post 

feel free to leave a comment or ask any questions.

Cheers Dee X

Products used

1. Tando creative:- Andy Skinner Industrial Wings Kit
2. Andy skinner Stamps:- SKULDOGGERY rubber stamp set
3. Deco Art:- Fluid Acrylics: Diarylide Yellow, Blue Green Light, Pyrrole Red, Prussian Blue Hue, Transparent Yellow Iron Oxide. & Quinacridone Gold