Halloween B and H Collection ATC Matchbox - by Kim

 You'll have plenty of time to get this done for Halloween!

Construction:

First, build your ATC matchbox and drawer (see previous posts for construction if necessary). 

We need to make a space for our skeleton, a hidden layer! For this I used leftover greyboard, about 85x105mm, and some coffee stirrers. 
I cut a coffin shaped hole in the main board and built up the edges with coffee stirrers, I used clothes pegs to hold it all in place until the glue had set. 

Paint everything black. When dry paint the skeleton onto the box top so that it will appear to be laying in the coffin. I used some pumpkins from the Minis - Mixed Halloween set to add extra scariness. After painting I glued them so they appear to be coming out of the coffin.

When it's done, glue the coffin layer on the box top so that the skeleton is revealed behind the pumpkins.

Next, I needed the graveyard scene to go on top. I used another piece of leftover greyboard for the ground, same size as the coffin layer, and a smaller piece for the gravestone. The 'freshly dug' mound is made of texture paste - this will take quite a while to cure properly as it is a thick layer. The spade is a piece if bamboo stick from one of those room smelly jars with a piece of greyboard for the blade. As the texture paste dried a crack appeared just the right size for the spade, but otherwise use a craft knife to cut a slot. The cat was leftover from a Casa Bonita project.

I used ribbon as a hinge for the graveyard scene.

Painting:

I used Forest Green and Foliage Green for the grass, the mound is Burnt Umber with a light beige dry brushed on to the raised detail. The gravestone was painted Zinc grey with random streaks of black, Green Gold and Quinacridone Gold Fluid acrylics, and light beige. The inscriptions are in light beige. 
The cat is black with Tangerine eyes,

Underneath, the coffin layer is Burnt Umber, Forest Green edging, and black surround to the hole - all drybrushed on to blend with each other.

The bat dangles from a piece of narrow ribbon and 'appears' from the coffin when the grave is opened. It is from the Minis - Mixed Halloween set.

The matchbox is black inside and out.

ATC cards and coins:

I just had to make the cards in to mini gravestones. Trim the top to a suitable shape, base coat in Zinc grey, add an inscription in light beige, then add colours as per the gravestone on the lid.

The coins are decorated to look like pumpkins. Basecoat in Burnt Orange, add dark stripes with Burnt Umber - use this colour to round-off the bottom of the segments to give it a pumpkin shape. Drybrush Burnt Umber as shadow around the bottom. Use light beige to add highlights to the tops. Finish with a green stalk.

Add a suitable title for your collection of ATCs and ...

... that's it.

If you don't have large enough pieces of greyboard hanging around for the coffin and graveyard, heavy cardboard or art board will work. Paint colours are not too important, any greens, browns, beige, and orange will do.

I hope you enjoy putting this spooky project together for Halloween - post yours on the Tando Creative Zone on Facebook!

(Why Burke and Hare? - Link to their Wikipedia page)

Products:

ATC Matchbox with cards and coins
Tando Minis - Mixed Halloween
150g Greyboard Offcuts - useful for projects
Coffee stirrers or similar

DecoArt Americana Paints
I used Lamp Black, Forest Green, Foliage Green, Burnt Umber, Burnt Orange, Oyster Beige.
Green Gold and Quinacridone Gold are DecoArt Media Fluid Acrylics.